I called and spoke with several people about wiring. A few tips were to be sure to solder all connections. have water proof wire covering and Dan Emerson said he routed his wires around the rear of the tank and not under the tank in order to stay away from the heat of the motor. I decided to buy my supplies from restoration supply. I bought a black cloth covered stranded copper ign wires and Raja ends. I love the look of the Raja fittings
- This is a rajah fitting that clips on the end of a spark plug
- Here they are taken apart. These work by stabbing the wire that is held in the black part. I wanted these to be soldered
- Bend back the clip and then bore thru the Rajah so I can pull the wire thru and solder it